HO Scale: SD40-2 - DCC & SOUND - CN/GTW

Athearn

or

SKU Road Number Qty
ATH16700 5930 1 In Stock
Add to wishlist



Athearn Ready to Roll HO Scale: SD40-2 w/DCC & SOUND - CN/GTW

The EMD SD40-2 is a 3,000-horsepower (2,200 kW) C-C diesel-electric locomotive built by EMD from 1972 to 1989.

The SD40-2 was introduced in January 1972 as part of EMD's Dash 2 series, competing against the GE U30C and the ALCO Century 630. Although higher-horsepower locomotives were available, including EMD's own SD45-2, the reliability and versatility of the 3,000-horsepower SD40-2 made it the best-selling model in EMD's history and the standard of the industry for several decades after its introduction. The SD40-2 was an improvement over the SD40, with modular electronic control systems similar to those of the experimental DDA40X.

Peak production of the SD40-2 was in the mid-1970s. Sales of the SD40-2 began to diminish after 1981 due to the oil crisis, increased competition from GE's Dash-7 series and the introduction of the EMD SD50, which was available concurrently to late SD40-2 production. The last SD40-2 delivered to a United States railroad was built in July 1984, with production continuing for railroads in Canada until 1988, Mexico until February 1986, and Brazil until October 1989.

SD40-2s are still quite usable nearly fifty years after the first SD40 was made, and many SD40s and locomotives from the pre-Dash-2 series (GP/SD 40s, 39s and 38s, and even some SD45s) have been updated to Dash-2 specifications, possibly including downgrading from 20-645E to 16-645E engines, including, certainly, Dash-2 electrical controls, although the pre-Dash-2 frames cannot accommodate the somewhat similar HTC truck in the space allocated to the Flexicoil C truck (the frame is not long enough). Most SD40-2s which remain in service have by now been rebuilt "in-kind" for another 30 to 40 years of service, although a few (under 30) have been rebuilt to incorporate a 12-cylinder EFI-equipped 710G engine.

CN Features:

These units originally belonged to the Missouri Pacific. Later, they went to Grand Trunk Western, where they served until CN's "North America" rebranding in the early 90s. At this time, several were repainted in the new North America scheme, and continue to serve to this day- with various modifications and upgrades. As on the prototype, the units continue to wear their GTW reporting marks.

  • All road numbers
    • 81" nose, chickenwire grills, small anticlimbers
    • Rebuilt front cab door per prototype - First time in plastic
    • Windshield wipers
    • Hood mounted bell
    • Small Sinclair & large firecracker antennas
    • Front Illuminated Canadian style ditch lights
    • Standard EMD plow
  • #5390
    • Airchime K3 horn
    • Prime air conditioner
    • 2-pane all weather window on engineer's side
    • Rear Canadian style rock plow
    • Alternate style rear numbers
    • Cab vent

LOCOMOTIVE FEATURES:

  • Fully assembled and ready-to-run
  • Four road numbers
  • Coupler cut levers with loops
  • Trainline and MU hoses with silver ends
  • "Mushroom" nose vent on right side
  • Separately applied wire grab irons
  • Antiglare panel
  • Standard late Dash-2 4-window cab without louvers or roof seam
  • See through cab windows
  • Sliding cab side windows
  • Welded ECAFB
  • See-through dynamic brake and radiator fans
  • Fine scale handrails
  • Frame mounted bell
  • Detailed 4000 gallon fuel tank
  • Separately applied air tanks
  • Speed recorder attached to appropriate axle per prototype (except undecorated)
  • McHenry scale knuckle spring couplers
  • Highly-detailed, injection molded body
  • Painted and printed for realistic decoration
  • Bi-directional constant lighting so headlight brightness remains consistent
  • All-wheel drive with precision gears for smooth and quiet operation
  • All-wheel electrical pickup
  • 5-pole motor with flywheels and multi-link drivetrain for trouble-free operation
  • Compatible with ATHG63839 Genesis motor retrofit kit
  • Window packaging for easy viewing
  • Interior plastic blister safely holds the model for convenient storage
  • DCC Ready 8 and 9 pin Quick Plug technology
  • Available also with factory installed RTR Sound by Soundtraxx
  • Nickel plated, blackened machined wheels
  • Wheels with RP25 contours operate on Code 55, 70, 75, 80, 83, 100 rail
  • Replacement parts available including motor brushes
  • Minimum radius: 18"
  • Recommended radius: 22"


    Related Items