HO Scale: Rivet Counter - GE DASH 9-40W - DCC Ready - Norfolk Southern

ScaleTrains

1 item left

SKU Road Number Price Qty
SXT32372 9550 $ 179.99 Sold Out
SXT32376 9597 $ 179.99 1 In Stock
SXT32374 9580 $ 179.99 Sold Out
SXT32378 9613 $ 179.99 1 In Stock
SXT32380 9641 $ 179.99 1 In Stock
SXT32382 9672 $ 179.99 1 In Stock
SXT32539 9555 $ 179.99 Sold Out
Add to Wishlist
​ ​


ScaleTrains HO Scale: Rivet Counter - GE DASH 9-44CW - DCC Ready - Norfolk Southern

With railroad, road number, and era specific details, our Rivet Counter series DASH-9 is the definitive model of this popular GE locomotive. In our continuing effort to push the boundaries of realism in model railroading, the Rivet Counter DASH-9 features operating LED front, rear, and side walkway lights.

Features:
Road number 9550
  • Era: 2000 to 2013, NS series 9535-9559, built 2000
Road numbers 9580, 9597, 9613, 9641 and 9672
  • Era: 2001 to 2013, series 9560-9744, built 2001-2002
Other Features:
  • Front high (cab) mounted headlight
  • Operating front and rear deck mounted ­­alternating LED ditch lights
  • Operating LED front, rear, and side walkway lights
  • Tall snowplow with open doors and grab irons
  • 5-step stepwells with see through steps
  • Walkway with front and rear anticlimber
  • Wide profile end handrails
  • Nose door without window
  • Two-piece nose top grab irons
  • Standard battery box doors
  • GE safety cab with three (3) side windows
  • Cab interior with standard control stand for engineer and desktop for conductor
  • In cab grade crossing camera
  • Dual large Sinclair “ice skate” communication antenna and small Sinclair “ice skate” End of Train (EOT) telemetry antenna
  • Dayton Phoenix (DPG) Model 280260 HVAC Unit
  • Late angled engine cab profile
  • Late dynamic brake exhaust
  • Late electrical cabinet with step on rear
  • Lost-wax brass Nathan AirChime K5HAR2 horn mounted on engine cab
  • Late non-flanged exhaust stack housing
  • Late radiator door grilles in alternating heights
  • Low-mounted rear sandfiller
  • Electric handbrake without brake wheel and with electric brake actuator on right front truck sideframe
  • Late lifting lugs on ends of radiator wings
  • Separate air tanks with lower mounting brackets, connector pipe and connector pipe cover
  • Wabtec Graham White 994-500 Series Air Dryer
  • Fuel tank mounted electronic bell
  • Single fuel fills per side
  • 5,000-galon fuel tank with angled weld seam and clean out on left side
  • Round and vertical analog fuel gauges along with digital fuel gauge
  • Late Hi-Ad trucks with cantilever struts on right front and left rear sideframes
  • Spare coupler knuckle holders on rear pilot face
  • Paint color matches Tru-Color Paint color: TCP-010 Black
Rivet Counter DASH 9-44CW Locomotives Also Feature:
  • Fully-assembled (except undecorated)
  • Multiple road numbers
  • Operating front, rear, and side LED walkway lights
  • Printed and LED lighted number boards
  • Four (4) cabs
  • “Gullwing” with three (3) side windows
  • “Gullwing” with four (4) side window
  • Standard safety cab with low headlight
  • Standard safety cab with high headlight
  • Dayton Phoenix (DPG) Model 280620 or Motive Equipment (MEI) ME7000 HVAC Units
  • GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and struts (per prototype)
  • Early with reinforcement bulge
  • Late with cantilever struts on right front and left rear sideframes
  • Late with non-cantilevered struts on all four sideframes
  • Late with cantilever struts on all four sideframes
  • Rotating axle bearing caps
  • Nose door with or without window
  • Four (4) step or five (5) step stepwells with see through steps
  • Narrow or wide profile end handrails
  • One or two-piece nose top grab iron(s)
  • Early (curved), late (angled) or late (angled) with “tri-fold” power assembly access doors engine cab profile
  • Early flanged or late non-flanged exhaust stack housing
  • Early or late lifting lugs on ends of radiator wings
  • Low or high rear sand filler
  • Separate air tanks with lower or upper mounting brackets
  • Three (3) types of fuel fills per side: single; dual; dual with rear fill blanked
  • Spare coupler knuckle holders on truck sideframes or rear pilot face
  • GE “nub” pattern walkway tread
  • Accurately profiled frame with separately applied plumbing and traction motor cabling
  • Detailed cab interior with separate floor, rear wall, seats, and desktop controls or control stand, per prototype
  • Tinted cab side windows
  • 26 individually-applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment
  • “Bathtub” exhaust silencer
  • 5,000-gallon fuel tank
  • Factory-applied detail parts: wire grab irons, snowplow, spare knuckles, trainline hoses, 3-hose MU clusters, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank mounted bell, brake wheel, exhaust stack and more
  • Motor with 5-pole skew wound armature
  • Dual flywheels
  • All-wheel drive
  • All-wheel electrical pick-up
  • Directional LED headlights
  • Printing and lettering legible under magnification
  • Paint colors match Tru-Color Paint color wheverpossible
  • Operates on Code 70, 83, and 100 rail
  • Packaging safely stores model
  • Minimum Radius: 18”
  • Recommended Radius: 22”
DCC Ready locomotives also feature:
  • Operable using a DC power pack
  • DCC ready with 21-pin connector


Related Items

Welcome to

Now that you're here we want to make sure you know all that we offer. Join our mailing list to learn all about the TrainLife.com advantage!

x

Welcome to the Loyalty Points Demo Store :-)

Sign up and receive 5000 pts to test out in our Store.

Earning and redeeming Points

$1
Earns you
5
$1
Redeems to
50

Ways you can earn

  • Product Purchase
  • Refer a friend
  • Share on social media

Learn more about our program