HO Scale: Rivet Counter - GE C39-8 - DCC Ready - Conrail


SKU Road Number Price Qty
SXT31195 6000 $ 169.99 Sold Out
SXT31197 6002 $ 169.99 Sold Out
SXT31199 6008 $ 169.99 Sold Out
SXT31201 6013 $ 169.99 Sold Out
Add to Wishlist
​ ​

Scale Trains HO Scale: Rivet Counter - GE C39-8 - DCC Ready - Conrail


Introduced in 1984, the C39-8 maintained the clean contours of the long hood and rounded cab roof of the Dash-7 series but featured larger, angular radiator “wings” at the rear of the carbody, an angular low short hood, and a boxy dynamic brake and clean air compartment at the front of the long hood, which jutted above the cab roofline.

Even though Conrail and Norfolk Southern were the only two railroads to purchase C39-8 locomotives from GE, both railroads routinely operated C39-8s as run-through power on CSX, Union Pacific, and Southern Pacific. In fact, SP leased Conrail C39-8s in the early 1990s.

The only two C39-8 locomotives in operation today are owned by the Pennsylvania Northeastern Railroad. We would like to thank the PN for their role in developing this one-of-a-kind locomotive.

Road Number Specific features:
Road Numbers (2nd Run): 6000, 6002, 6008, and 6013
  • Era: Late 1990s
  • Operating ditch lights on front pilot face – alternately flash when horn is blown, per prototype
  • As-delivered “skinny” cab numbers
  • Retrofitted “inverted-L” nose grab irons and large vertical grab iron on right side long hood end
  • GSC trucks with rotating axle bearing caps and separately applied details including brake cylinders, air piping, and handbrake chain

All Conrail road numbers also include
  • Series: CR 6000-6021
  • Operating front and rear red marker lights
  • Phase III carbody with brakewheel, and early radiator exhaust grills (6-panel)
  • Small CR-style plow mounted on the front pilot
  • Large front anticlimber
  • Large and small Sinclair “Excalibur” cab roof antennas (Comm. and EOT)
  • Leslie RSL-3R horn mounted on offset pedestal on engine compartment
  • Etched metal see-through standard (2-vent) dynamic brake intake grilles with blower motors visible inside
  • “Bathtub” exhaust silencer
  • 24 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment
Additional features:
    • All-new model
    • Fully assembled
    • Up to six (6) road numbers, detailed per prototype and era
    • Directional LED headlights
    • Printed LED lighted number boards
    • Carbodies with correct panels and grilles per variant
      • Phase Ib - Cab with rounded-corner doors, no embossed X-panels on the hood end or nose sides, stand-off radiator grills, and vertical grab iron strips on the long hood end
      • Phase II - Cab with rounded-corner doors, embossed X-panels on the hood end and nose sides, stand-off radiator grills, and no vertical grab iron strips on the long hood end
      • Phase III - Cab with square-corner doors, embossed X-panels on the hood end and nose sides, flush radiator grills with an additional small vertical screen, and no vertical grab iron strips on the long hood end
    • Standard (2-vent) or high-capacity (3-vent) dynamic brakes per prototype
    • Early (6-panel) or late (4-panel) radiator exhaust grilles
    • Ratchet or wheel handbrakes
    • Adirondack or GSC (or mix of both!) truck sideframes per prototype
    • GE “nub” tread plate on walkways
    • Highly-detailed 4,400 gallon fuel tank with fuel fillers and gauges
    • Air reservoirs with separate plumbing
    • See-through stepwell steps
    • See-through dynamic brake exhaust
    • Accurately profiled frame with separately applied plumbing and cabling
    • Detailed cab interior with separate floor, rear wall, seats, and control stand
    • Factory-applied wire grab irons, snowplow, spare knuckles, trainline hoses, 3-hose MU clusters, MU cables, uncoupling levers, windshield wipers, mirrors, air reservoirs, underframe bell, brake wheel, and more.
    • Semi-scale coupler buffer equipped with ScaleTrains.com durable metal semi-scale E Type knuckle couplers
    • All-wheel drive
    • All-wheel electrical pick-up
    • Dual flywheels
    • Motor with 5-pole skew wound armature
    • Printing and lettering legible under magnification
    • Operates on Code 70, 83, and 100 rail
    • Packaging safely stores model
    • Minimum Radius: 18”
    • Recommended Radius: 22”

    Related Items

    Welcome to

    Now that you're here we want to make sure you know all that we offer. Join our mailing list to learn all about the TrainLife.com advantage!


    Welcome to the Loyalty Points Demo Store :-)

    Sign up and receive 5000 pts to test out in our Store.

    Earning and redeeming Points

    Earns you
    Redeems to

    Ways you can earn

    • Product Purchase
    • Refer a friend
    • Share on social media

    Learn more about our program