HO Scale: Rivet Counter - EMD SD45 - DCC & Sound - Pennsylvania Railroad

ScaleTrains

1 item left

SKU Road Number Price Qty
SXT32178 6144 $ 274.99 1 In Stock
SXT32180 6148 $ 274.99 1 In Stock
SXT32182 6152 $ 274.99 1 In Stock
SXT32184 6155 $ 274.99 1 In Stock
SXT32186 6163 $ 274.99 1 In Stock
SXT32188 6169 $ 274.99 Sold Out
Add to Wishlist
​ ​


ScaleTrains HO Scale: Rivet Counter - EMD SD45 - DCC & Sound - Pennsylvania Railroad


With countless railroad, road number, and era specific details, the Rivet Counter HO Scale SD45 is the definitive model of this ground-breaking high horsepower locomotive. First built in 1966, the SD45 served numerous Class I railroads and eventually secondhand owners and shortlines. While no longer used by Class 1 railroads, some SD45s and SD45 carbodies remain in service today with shortlines and regionals.
Features:
Pennsylvania Railroad
  • Era: As-built, series 6141-6166, built 1/67 (Phase lb1)
  • Road numbers 6144, 6148, 6152, 6155 and 6153
  • ACI Label placed on sixth engine compartment door
  • Era: As-built, series 6167-6169, built 2/67 (Phase lb1)
  • Road number 6169
  • ACI Label placed on eighth engine compartment door

All Pennsylvania SD45s include:
  • “35-Line” cab with standard front windshields
  • Standard EMD sunshades and long sunshade tracks
  • Standard EMD high headlight in numberboard housing
  • Front and rear MU hose catch trays with footboards
  • Operating LED-lit, red-only marker lights
  • 81” low short hood with plated-over handbrake location
  • Early straight grabs and “flipped” NBW mounting on nose front and top; top and side grabs relocated to left side to clear cab signal cabinet
  • Latched battery box doors with narrow louvers
  • Latched cab sub-base doors with early hinges
  • Front and rear early small deck extension
  • Pivoting front and rear drop steps
  • “Short” stepwells with see-through steps
  • “Early” pattern walkway treadplate
  • Rectangular walkway lights
  • Tall clear wind wings mounted fore and aft of cab side window, both sides of cab
  • Lost-wax brass Leslie SU-3L-LRO horn, center rear of number board housing
  • ­­Large Sinclair Excalibur “ice skate” antenna (communications) mounted on cab roof
  • Standard electrical cabinet seam and bolted alternator door
  • No ECAFB
  • Early (smooth) blower duct housing
  • Early inertial air intake grilles without drip rails
  • Early (short forward taper) extended-range dynamic brakes
  • Chicken-wire pattern radiator intake grill mesh
  • Long walkway duct (three short stanchions)
  • Front and rear straight uncoupling levers with four brackets
  • End handrail set with pilot face mounted outer end rail stanchions
  • 4-hose MU hose clusters with silver gladhands
  • Dual early (angled) deck-mounted MU receptacles, with handrail stanchion-mounted dummy MU receptacle
  • Short “Nub-Bottom” pilot face with full-width single grab iron
  • Tall jacking pads with holes
  • Flush-mount EFCO button
  • Frame-mounted bell
  • Salem air filter (accordion style)
  • 4,000-gallon fuel tank with single fuel filler, single vertical fuel gauges, and round fuel gauge on both tank sides
  • Detailed Flexicoil (low-mount brake cylinder) trucks with Hyatt bearing caps, and sanding lines and brackets
  • Speed recorder second axle, left side
  • ACI labels attached to long hood sides
  • Early (3-Strap) cab signal cabinet on top of battery box, engineer’s side
  • Paint colors matched to Tru-Color Paint: TCP-07 PRR Brunswick Green
Rivet Counter SD45 Locomotives Also Feature:
  • Fully assembled
  • Multiple road numbers
  • Printed and LED-lighted number boards
  • Scale sectioned walkway treadplate
  • Underbody frame rail with separate plumbing and traction motor cables
  • Accurate hood door and long hood details
  • Inertial air intake grilles without drip rails
  • Separately applied dust bin and exhaust stack
  • Accurately profiled dynamic brake housings
  • See-through dynamic brake intakes with resistor grid
  • Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand
  • Sliding cab windows
  • Factory-applied wire grab irons, wire lift rings, windshield wipers, horns, coupler cut levers, trainline hoses with silver gladhands, sand hatch covers, and much more
  • Semi-scale coupler buffer equipped with durable metal semi-scale Type “E” knuckle couplers
  • Directional LED headlights
  • All-wheel drive
  • All-wheel electrical pick-up
  • Motor with 5-pole skew-wound armature
  • Dual flywheels
  • Printing and lettering legible even under magnification
  • Operates on Code 70, 83 and 100 rail
  • Packaging safely stores model
  • Color matched to Tru-Color Paint colors whenever possible
  • Minimum radius: 18”
  • Recommended radius: 22”
DCC & sound equipped locomotives also feature:
  • ESU LokSound 5 DCC & Sound decoder with “Full Throttle”
  • Dual cube-type speakers
  • EMD 20-Cylinder 645E3 turbocharged prime mover sounds
  • ESU designed “PowerPack” with two super capacitors
  • Operates on both DC and DCC layouts*
* Some sound and lighting function on DCC & sound equipped models are not operable using DC


Related Items

Welcome to

Now that you're here we want to make sure you know all that we offer. Join our mailing list to learn all about the TrainLife.com advantage!

x

Welcome to the Loyalty Points Demo Store :-)

Sign up and receive 5000 pts to test out in our Store.

Earning and redeeming Points

$1
Earns you
5
$1
Redeems to
50

Ways you can earn

  • Product Purchase
  • Refer a friend
  • Share on social media

Learn more about our program