ScaleTrains HO Scale: Museum Quality EMD SDL39 - DCC Ready - Ferrocarriles del Pacifico SA

• Era: 2000s to 2010s
• Road number 2345
  • Large green arrows with small Fepasa logo on front of the nose
  • Small Fepasa logo on the end of the long hood
  • Black Hyatt bearing caps
• Road number 2349
  • Small green arrows with large Fepasa long on the front of the nose
  • Large Fepasa logo on the end of the long hood
  • Red Hyatt bearing caps
• Variations in logos between units
• Operating front and rear pilot mounted alternating LED ditch lights*
• Operating LED-lit tricolor (red, green, and white) flush-mounted class lights with raised gasket**
• Operating LED-lit cab interior and control stand lights*
• Operating LED-lit front, rear, and fireman’s side walkway lights*
• Operating LED-lit ground lights on both sides of locomotive
• Photoetched metal rock guard screens over all cab windows
• Lost-wax brass Nathan AirChime P-3 three-chime horn mounted to clearance bracket on left side of long hood
• Front and rear pilots with black and silver barricade striping
• Front snowplow removed; rear weed cutter plow
• Front and rear early small deck extension
• Pivoting front and rear drop steps
• Stepwells with see-through steps
• Scale sectioned “late” pattern walkway treadplate
• Latched battery box doors with narrow louvers
• Latched cab sub-base doors with early hinges
• 81” low short hood without cab heater louvers
• Drop grabs and standard nut-bolt-washer (NBW) mounting on nose front and top
• “35-Line” cab with standard front windshields and no cab heater louvers
• Standard EMD high headlight in numberboard housing
• Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand
• Sliding cab windows
• No mirrors, sunshades, or antenna
• Standard EMD arm rests
• Snow shield brackets removed
• Inertial air intake grilles without drip rails
• Ratchet brake with chain guard
• Small ECAFB
• Early (smooth) blower duct housing
• Separately applied dust bin and exhaust stack
• Non-dynamic brake
• “Chickenwire” radiator grilles
• Standard-height fan housings
• Photoetched concentric ring fan grilles
• Front and rear straight uncoupling levers with loop handles; two inner and two outer mounting brackets
• Handrail set with pilot face mounted outer end rail stanchions and solid railing
• 4-hose MU hose clusters with silver gladhands
• Late deck-mounted MU receptacle
• Pilot face bracing detail behind stepwells
• Underbody frame rail with separate plumbing and traction motor cables
• Standard jacking pads at bolsters; total two (2) per side
• Sill-mount EFCO button
• Salem air filter (accordion style)
• External toilet drain
• 1,200-gallon fuel tank with fuel fillers, single vertical fuel gauges on both tank sides, round fuel gauge on right side, and external waste retention tank on rear
• Detailed light weight EMD C-C export trucks with Hyatt bearing caps and separate brake cylinders, brake lines, and outboard sanding lines
• Speed recorder mounted on the second axle, left side

• Fully assembled
• Multiple road numbers
• Factory-applied wire grab irons, wire lift rings, windshield wipers, horns, coupler cut levers, trainline hoses with silver gladhands, sand hatch covers, and much more
• Semi-scale coupler buffer equipped with durable metal semi-scale Type “E” knuckle couplers
• Directional LED headlights
• All-wheel drive
• All-wheel electrical pick-up
• Motor with 5-pole skew-wound armature
• Dual flywheels
• Printing and lettering legible even under magnification
• Operates on Code 70, 83 and 100 rail
• Packaging safely stores model
• Minimum radius: 18”

• DCC & sound equipped locomotives also feature:
  • ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature
  • Dual cube-type speakers
  • EMD 12-Cylinder 645E3 turbocharged prime mover sounds
  • Curve squeal and frog clank sounds*
  • ESU designed “PowerPack” with two super capacitors***
  • Operates on both DC and DCC layouts