Digitrax: Series 3 - Plug N'Play N Scale DCC Decoders

• 1 Amp Continuous/1.25 Amp Peak Rating
  
• 0.5485” x 2.2165 w/o LEDs x .1015” (13.9319mm x 56.2991mm w/o LEDs x 2.5781mm)
• Install: Board Replacement
  
• 6-500mA Function Outputs
• FX3 Function
• No Worries Warranty

DTX-DN123K3 Specs:

Digitrax LocoMotion™ System
Your locomotives look like the real thing. The Digitrax LocoMotion™ System makes them run like the real thing, too!

• Torque Compensation for smooth as silk silent operation.
• 128 Speed Step operation (14 or 28 steps can also be used).
• Momentum with acceleration and deceleration.
• Normal Direction of Travel is user selectable.
• Switching Speed feature for easier and faster access to yard speeds.
• 3 Step Speed Tables set start, mid and max voltage for custom control.
• 28 Step Speed Tables with 256 level resolution for precise control.

• FX3 Function outputs for prototypical lighting effects and on/off control:
• Constant Brightness Lighting with directional or independent control
• Realistic Effects like Ditch lights, Mars lights, strobes, and many more.
• FX3 & Standard Function Qualifiers operate functions based on direction,
• F0 on or off, direction and F0, and whether loco is moving.
• Function Remapping for custom function setup.
• Master Light Switch turns off all lights & functions with one keystroke.
• Advanced Consist Function Controls
• Decoder Lock equipped
• Transponder equipped ready for transponding on your layout.
• All Mode Programming with Operations Mode Read Back reads back CV values right on the mainline.
• Decoder Reset CV with or without speed table reset.
• Motor Isolation Protection prevents damage to your decoder.
• Basic, Advanced & UniVersal Consisting
• 2 Digit and 4 Digit Addressing
• DCC Compatible
• FCC Part 15, Class B RFI compliant

• Designed to fit the Kato N scale P-42, PA-1 & E-8
• Golden-White LEDs for added realism
• Decoder Lock equipped

• Designed to fit the Kato N scale F3 A & B
• Golden-White LEDs for added realism
• Decoder Lock equipped

• Designed to fit the Kato N scale F40PH
• Decoder Lock equipped

• Board Replacement Decoder for Kato N-Scale E5
• 1.5 Amp/2.0 Amps Peak Motor Current Rating
• 6 FX3 Functions-500mA Function Current Rating
• Note: DN163K0A will not fit in the new E5 locos.

DTX-DN163K1C Specs:

• Designed to fit the Kato N scale SD40-2 locos made from year 2006 onward

• Designed to fit the Kato N scale EMD Class 66, GG1 and DD51 locomotives