HO Scale: DCC Mobile Decoder - 4 Function

Out of Stock Reg. Price: $ 25.95

Low Stock

Title

SKU	Title	Price	Qty
STX-852003	MC2H104OP	$ 33.95	Sold Out
STX-852004	MC2H104P9	$ 28.95	Sold Out
STX-852005	MC1H104P21	$ 25.95	Sold Out

Add to Wishlist

MC2H104OP:

HO-scale, 4-function decoder that measures 25mm x 16mm x 6mm with a 9-pin JST to 8-pin NMRA wiring harness that can be used in many DCC-ready models that have an NMRA 8-pin socket. This decoder will operate in both DC and DCC.

MC2H104P9:

HO-scale, 4-function decoder that measures 25 x 16 x 6mm with a 9-pin ‘universal’ JST wiring harness that is mostly used in older pre-DCC or brass models. This decoder will operate in both DC and DCC.

MC1H104P21:

HO-scale, 4-function decoder that measures 25.1 x 15.6 x 4.7mm. This decoder has a 21-pin connector arranged according to the NMRA Standard that easily plugs into the factory-installed PCB of many models. This decoder will operate in DCC only.

Dimensions: 25.1 x 15.6 x 4.7mm
Max. Motor Stall Current: 1A
Max. Function Current: 100mA (each output)
Function Outputs: 4
DCC Track Voltage: 21 Volts Maximum

About SoundTraxx DCC Mobile Controlers

Equip your fleet with DCC without breaking the bank! SoundTraxx DCC Mobile Decoders provide high-performance operation and 14 Hyperlight lighting effects in a variety of easy-to-use formats for models that do not exceed a 1 amp stall current. Since they utilize our Hyperdrive technology, these mobile decoders are easy to speed-match with Tsunami Digital Sound Decoders.

The 2-function MC1 Series DCC Mobile Decoders fit in many small N- and Z-scale models. The dual-mode MC2 Series DCC Mobile Decoders have four lighting outputs and support CVs 5 and 6 to allow for optional three-point speed curves.

In addition to offering a selection of 14 Hyperlight lighting effects, options include a choice of directional or Rule 17 lighting control, grade-crossing timers, adjustable flash rate, and an LED brightness correction control mode.

The SoundTraxx Hyperdrive Motion Control System, which is found in all Tsunami Digital Sound Decoders, incorporates advanced motor control features such as high-resolution speed steps and high-frequency PWM drive (pulse-width-modulation) to help eliminate motor ‘hum.' Hyperdrive also includes such features as programmable speed curves and adjustable momentum.

All formats are compatible with NMRA DCC Standards and Recommended Practices, and are manufactured in Durango, Colorado.