HO Scale: Rivet Counter - EMD SD45 - DCC Ready - Penn Central 'Red Logo'

ScaleTrains

2 items left

SKU Road Number Price Qty
SXT32915 6125 $ 189.99 2 In Stock
Add to Wishlist
​ ​


ScaleTrains HO Scale: Rivet Counter - EMD SD45 - DCC Ready - Penn Central 'Red Logo'

With countless railroad, road number, and era specific details, the Rivet Counter HO Scale SD45 is the definitive model of this ground-breaking high horsepower locomotive. First built in 1966, the SD45 served numerous Class I railroads and eventually secondhand owners and shortlines. Most including rebuilds were retired by the early 2000s.

Road Number Specific Features:

  • Era: early 1970s to mid 1970s
  • Series 6123 to 6138 (ex-PRR), built 11/66
  • Phase Ib1
  • Fully-assembled
  • Operating LED, red-only marker lights**
  • Operating LED ground lights on both sides of locomotive
  • Printed and LED-lighted number boards
  • Late (2-strap) cab signal cabinet on top of battery box, engineer’s side
  • Front and rear full-width MU hose catch trays without footboards
  • “Short” stepwells with see-through steps
  • “Early” (“X”) pattern walkway treadplate
  • Front and rear early small deck extension
  • Pivoting front and rear drop steps
  • Rectangular walkway lights (non-operating)
  • Latched battery box doors with narrow louvers
  • Cab sub-base doors with stiffener rib
  • 81” low short hood with plated-over handbrake location
  • Standard EMD high headlight in numberboard housing
  • Early straight grabs and “flipped” nut-bolt-washer (NBW) mounting on nose front and top; top and side grabs relocated to left side to clear cab signal cabinet
  • “35-Line” cab with standard front windshields
  • Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand
  • No cab vents
  • Sliding cab windows
  • Tall square corner clear wind wings with mirrors at the bottom mounted fore of cab side window on both sides of cab
  • No sunshades
  • No arm rests
  • Lost-wax brass Leslie SU-3L-LRO horn mounted center rear of number board housing
  • Large Sinclair Excalibur “ice skate” antenna (communications) mounted on cab roof
  • Accurate hood door and long hood details
  • Standard electrical cabinet seam and bolted alternator door
  • No ECAFB
  • Early (smooth) blower duct housing
  • Inertial air intake grilles without drip rails
  • Standard-height dust bin
  • Standard-height exhaust stack
  • Early (short forward taper) extended-range dynamic brakes
  • Accurately profiled dynamic brake housing
  • See-through dynamic brake intakes with resistor grid
  • “Chickenwire” radiator intake grilles with diamond-pattern mesh screens
  • Standard-height fan housings
  • Photoetched spiral-ring fan grilles with center disk
  • Long walkway duct with three short stanchions
  • Semi-scale coupler buffer equipped with durable metal semi-scale Type “E” knuckle couplers
  • Front and rear straight uncoupling levers with four brackets
  • Handrail set with pilot face mounted outer end rail stanchions
  • 4-hose MU hose clusters with silver gladhands
  • Dual early (angled) deck-mounted MU receptacles
  • Short “nub-bottom” pilot face
  • Pilot face bracing detail behind stepwells
  • Pilot face grab iron with inner mounting points
  • Underbody frame rail with separate plumbing and traction motor cables
  • Tall jacking pads with holes
  • Sill-mount EFCO button
  • Frame-mounted steel bell
  • Salem air filter (accordion style)
  • 4,000-gallon fuel tank with single fuel filler, single vertical fuel gauge, and round dial fuel gauge per side
  • Detailed Flexicoil-C (low-mount brake cylinder) trucks with Hyatt bearing caps and sanding lines and brackets
  • Speed recorder second axle, right side
  • ACI labels attached to long hood sides
  • Factory-applied detail parts: wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and much more
  • Motor with 5-pole skew-wound armature
  • Dual flywheels
  • All-wheel drive
  • All-wheel electrical pick-up
  • Directional LED headlights
  • Printing and lettering legible even under magnification
  • Operates on Code 70, 83 and 100 rail
  • Packaging safely stores model
  • Minimum radius: 18”
  • Recommended radius: 22”
DCC & sound equipped locomotives also feature:
  • ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature
  • Dual cube-type speakers
  • EMD 20-Cylinder 645E3 turbocharged prime mover sounds
  • ESU designed “PowerPack” with two super capacitors***
  • Operates on both DC and DCC layouts
DC/DCC & sound ready locomotives also feature:
  • Operable using a DC power pack
  • DCC-ready with 21-pin connector
* Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC

** During DC operation, class lights illuminate in white. Access to other colors and the ability to change colors requires an ESU DCC decoder while operating in DCC

*** Compatible with appropriately programmed ESU decoders while operating using DCC


Related Items

Welcome to

Now that you're here we want to make sure you know all that we offer. Join our mailing list to learn all about the TrainLife.com advantage!

x

Welcome to the Loyalty Points Demo Store :-)

Sign up and receive 5000 pts to test out in our Store.

Earning and redeeming Points

$1
Earns you
5
$1
Redeems to
50.00

Ways you can earn

  • Product Purchase
  • Refer a friend
  • Share on social media

Learn more about our program