HO Scale: Rivet Counter - EMD SD40-2 - DCC Ready - Union Pacific 'Fast Forty'

ScaleTrains

2 items left

SKU Road Number Price Qty
SXT31293 8077 $ 159.99 Sold Out
SXT31295 8080 $ 159.99 Sold Out
SXT31297 8094 $ 159.99 Sold Out
SXT31299 8099 $ 159.99 2 In Stock
Add to Wishlist
​ ​


Scale Trains HO Scale: Rivet Counter - EMD SD40-2 - DCC Ready - Union Pacific 'Fast Forty'

The Rivet Counter series SD40-2 is the definitive HO Scale model of EMD’s best-selling diesel locomotive. This model combines smooth operating performance with unparalleled railroad, road number, and era specific details. Even though the first SD40-2s were first built nearly half a century ago, several continue in service today. 

 

Union Pacific 'Fast Forty' Details

 

  • Era: As delivered, series 8077-8095, built 1979 Phase IId2
  • Road numbers 8077, 8080, 8094 and 8099
  • UP “Fast Forties” – prototype was modified with high speed gearing to lash-up with DDA-40X “Centennial” locomotives
  • Operating LED Saturn 6552 Strobe Light
  • Operating LED tricolor flush-mounted class lights with raised gasket
  • Front and rear tall pilot plow with high trainline hose cut out, MU hose doors and grab irons
  • 88″ low short hood with wheel handbrake
  • Rectangular walkway lights mounted between sandbox clean out doors (non-operating)
  • Bolted battery box doors with wide louvers
  • Late cab sub-base doors with lift-off hinges
  • Front and rear late small deck extension
  • Late “fixed” drop step
  • “Tall” stepwells with see-through steps
  • Dash two cab with welded side window panels
  • Standard EMD sunshades and short sunshade tracks
  • Standard EMD headlight in number board housing
  • Tall clear wind wings mounted fore and aft of cab side window on right side of cab
  • Rear cab side vent on left side
  • Leslie RS-3-LR Horn mounted on number board housing
  • Motorola ASP-16 “Firecracker” antenna mounted on number board housing
  • Early electrical cabinet “zig-zag” seam, further from rear of cab
  • Welded ECAFB (late)
  • Late inertial air intake grilles with top and bottom drip rail
  • Extended-range dynamic brakes without batten strip
  • Corrugated radiator intake grilles
  • See-through standard 48” radiator fan housings with fan blades visible inside
  • Curved radiator fan grab iron
  • Straight uncoupling levers with loop handles front and rear; two inner and two outer mounting brackets
  • Handrail set with inward facing end rail mounting brackets; chain and break-away stanchions on both ends
  • 3-hose MU hose clusters with silver gladhands
  • Deck mounted MU receptacle
  • Spare knuckle holders on fuel tank near fuel filler
  • Notched pilot faces without lifting holes or slots
  • Short jacking pads (late)
  • Forward engineer’s side sidesill notch
  • Flush-mount EFCO
  • Rearward facing handbrake chain mount for HTC trucks
  • Frame-mounted steel bell
  • Salem air filter (accordion style)
  • 4,000-gallon fuel tank with fuel fillers, vertical gauge and round gauge on stand
  • Detailed HT-C trucks with Hyatt bearing caps, late center axle snubbers, sanding lines and brackets, and D-77 traction motor and air duct details
  • Speed recorder mounted to first axle left front

 

Rivet Counter SD40-2 Locomotive Features:
  • Fully-assembled
  • Multiple road numbers
  • Printed and LED lighted number boards
  • Dimensionally accurate truck centers
  • Scale sectioned treadplate detail on the walkways
  • Underbody frame rail with separate plumbing and traction motor cables
  • Accurate hood door and long hood detail
  • Accurately profiled dynamic brake housings
  • See-through dynamic brake intakes with resistor grid detail
  • Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand
  • Sliding cab windows
  • Factory-applied wire grab irons, wire lift rings, windshield wipers, snowplows, horns, coupler cut levers, trainline hoses with silver gladhands, sand hatch covers, and much more
  • Semi-scale coupler buffer equipped with ScaleTrains.com durable metal semi-scale E Type knuckle couplers
  • Directional LED headlights
  • All-wheel drive
  • All-wheel electrical pick-up
  • Motor with 5-pole skew wound armature
  • Dual flywheels
  • Printing and lettering legible even under magnification
  • Color matched to Tru-Color Paint colors whenever possible
  • Operates on Code 70, 83 and 100 rail
  • Packaging safely stores model
  • Minimum radius: 18”
  • Recommended radius: 22”

DCC & sound ready (DC) locomotives also feature

  • Operable using a DC power pack
  • DCC ready with 21-pin connector



Related Items

Welcome to

Now that you're here we want to make sure you know all that we offer. Join our mailing list to learn all about the TrainLife.com advantage!

x

Welcome to the Loyalty Points Demo Store :-)

Sign up and receive 5000 pts to test out in our Store.

Earning and redeeming Points

$1
Earns you
5
$1
Redeems to
50

Ways you can earn

  • Product Purchase
  • Refer a friend
  • Share on social media

Learn more about our program